The DjCCS100 system is a field proven product designed for liquid pressure based or NH₃ control. The display console shows application rate in pounds or gallons of product being applied per acre and the bar graph indicates pressure (liquid application) or percentage of maximum flow rate (NH₃). The unit is easily programmed and can switch from liquid to NH₃ with the push of a button, and is still able to retain the settings for the other product.

• Controls liquid and anhydrous ammonia.
• Can be used with DjCMS100 for Speed & Area Monitoring.
• Optional lift switch can be tied into lift cylinder or three point hitch for hands free ON/OFF.
• Non-volatile memory protects programming even when disconnected from battery.
• Change rate on-the-go allows the user to determine the amount of increment or decrement from the target application rate every time the + or - button is pushed.

DICKEY-john DjCCS100 Granular

The DjCCS100 granular control system is based on the same field proven design as the DjCCS100 liquid & NH₃ controller. The unit displays application rate and the bar graph indicates percentage of maximum flow rate. A low hopper indication will display on the screen when used in conjunction with an optional hopper level sensor. To provide a fully instrumented system, add the DjCMS100.

• Controls granular product application.
• Works with single or dual drag belt.
• Change rate on-the-go allows the user to determine the amount of increment or decrement from the target application rate every time the + or - button is pushed.
• Non-volatile memory protects programming even when disconnected from battery.
• Can be used with DjCMS100 for Speed & Area Monitoring.

Flow-Trak is a sprayer monitor that provides the information needed to keep your chemical application on track. It helps eliminate waste and achieve more consistent results.

• Large, easy-to-read lighted liquid crystal display
• Lighted front panel for night use
• Application rate, flow rate, total flow, speed, distance and area per hour functions, plus two separate area counters
• Push-button run/hold switch
• Out-of-range warning light
• Optional remote run/hold sensor kit allows for hands-free operation

MT 2400

Automatically compensates for changing speed to maintain a preset application rate. Designed for use with separate electric boom switches.

• For liquid application, plus optional NH3 Kit
• Flow-based control
• On-the-go rate adjustment
• Application rate, flow rate, total flow, speed, distance and area per hour functions, plus two separate area counters
• Out-of-range warning light
• Lighted liquid crystal display and panel lighting for night use
• Optional Remote Run/hold sensor kit allows for hands-free operation

MT 2405F

Offers the same great features as the MT-2400, with the addition of another boom control.

• Flow-based control
• On-the-go rate adjustment
• Lighted liquid crystal display and panel lighting for night use
• Out-of-range warning light
• Manual operation available for accurate spot spraying

MT 3405F

Automatically maintains a preset application rate for liquid application and anhydrous ammonia.

• Flow based control for liquid application, also NH3 application with optional NH3 kit
• On-the-go rate adjustment
• Application rate, flow rate, total flow, speed, distance and area per hour functions, plus two separate area counter
• Out-of-range warning light
• On/off control for up to five separate boom sections
• Lighted liquid crystal display and panel lighting for night use
• Optional Remote Run/hold sensor kit allows for hands-free operation

MT 3405M

Offers all the same great features as the MT-3405 F; but we've added modularity!

• Flow- or pressure-based control
• GPS and PC compatible
• Utilities software on CD-ROM
• Built-in ON/OFF control for up to 5 separate boom sections
• RS-232 connection for variable rate application (VRA)
• For liquid and dry application, plus NH3 with optional kit