LAND MANAGERS

Kenneth's Sales & Service, Inc.

The Land Manager and Land Manager II application control systems are designed specifically to fit the needs of operators requiring precision application of pesticides, herbicides, fertilizer and anhydrous ammonia. Two versions of Land Manager are offered. A single product controller (Land Manager) or a dual product controller (Land Manager II). Both units are compatible with GPS systems for variable rate application.

Land Manager features include:

  • Unit controls Liquid (Flow or Pressure based), Granular, or NH3 applications.

  • Two digital accessory inputs (Fan RPM, Hopper Level, NH3 Vapor Detector, etc.)

  • One analog accessory input (Pressure Sensor, Temperature Sensor, etc.)

  • Allows your current DICKEY-john CCS100 /CMS100 system to be easily & economically upgraded to a GPS compatible controller by simply replacing the consoles.

  • A standard RS232 link allows software upgrades in the field and formal reporting data to be uploaded or downloaded, plus the ability to communicate with GPS systems for variable rate applications.

  • No need to fumble with buttons to display user information because Land Manager™ displays all information on one screen. Application Rate, Flow Rate or Pressure, Boom Status, Ground Speed, Channel Product Label, and Area Accumulation.

  • Change languages* and English/Metric conversions with the touch of a button with no need to reprogram.

  • Menu -driven programming and operation makes this unit one of the easiest controllers on the market to use.

  • Application Libraries- Allows storage of up to 10 different configurations to make switching between applications a simple push of the button.

  • Valve locking feature allows for instant product application when used in conjunction with vehicles boom shut-offs.

  • Minimum ground speed override simulates a user defined ground speed to maintain pressure and a good spray pattern at low speeds (such as crossing a waterway) until you reach a user defined shut-off speed.

  • Formal Reports - Log up to 10 individual reports containing information such as start/stop time, total product applied, area, and all information required for EPA reporting.

  • Loading - Allows system to load from a nurse truck, unload granular material, and allows for safe agitation while in transit to the field.

  • Monitors up to ten boom sections and displays on/off status on screen

  • Granular programming allows for dual or single drag belt.

  • Password Protection- Allows Supervisor or Manager to limit access to setup of configuration programming.

  • Product Level Monitoring- Monitor amount of product remaining and set alarm points for low level notification.

  • Tank Fill- Records the amount of liquid product loaded from the nurse tank to the sprayer when an optional flowmeter is installed on the tank fill line.

  • Pump Shutoff Module- Together with the tank fill, the optional Pump Shutoff Module enables you to automatically shut your loading pump off when the desired product level in your tank has been reached.

  • Built-in Service and Troubleshooting Menu.
     

 

 

Land Manager SE

The Land Manager® SE is built to the same rugged standards as the Land Manager® and Land Manager® II, only with fewer features. This allows for an economical, yet highly capable entry level control system. The Land Manager SE permits quick and easy setup that reduces the amount of training required by the operator. Versatile, the Land Manager SE will control liquid flow or pressure, granular, NH3, or hydraulically driven planters and drills. Loaded with many features, make the Land Manager SE your next controller.

Features of the Land Manager SE:

  • Quick & easy setup
  • Change rates on the go with the push of a button
  • 6 boom inputs
  • 1 digital accessory input (fan RPM, hopper level, NH3 vapor detector)
  • Distance measurement
  • Speed/area monitoring mode
  • U.S. or metric units
  • Non-volatile memory retains settings when disconnected from battery
  • Unit controls liquid (flow or pressure based), granular, or NH3 applications.
  • Allows your current DICKEY-john CCS100/CMS100 system to be easily and economically upgraded by simply replacing the consoles.
  • Change languages* and English/Metric conversions with the touch of a button with no need to reprogram.
  • Menu-driven programming and operation makes this unit one of the easiest controllers on the market to use.
  • Valve locking feature allows for instant product application when used in conjunction with vehicle's boom shut-offs.
  • Minimum ground speed override simulates a user defined ground speed to maintain pressure and a good spray pattern at low speeds (such as crossing a waterway) until you reach a user defined shut-off speed.
  • Allows system to load from a nurse truck, unload granular material, and allows for safe agitation while in transit to the field.
  • Granular programming allows for dual or single drag belt.
  • Allows supervisor or manager to limit access to setup of configuration programming.
  • Monitor amount of product remaining and set alarm points for low level notification.
  • Built-in service and troubleshooting menu.
  • Backed by technical support & service that is second to none

*Contact KSSI for available languages