|
Kenneth's Sales &
Service, Inc.
|
Saddle tanks by Agri-Products
are available for most
John Deere models. To
the left there are links
to the different models
of John Deere tractors
that Agri-Products
saddle and front mount
tanks are available. If
your tractor isn't
listed, contact
KSSI for more
information.
|
|
 |
-
900
-
1200
gallon
capacity
-
200,
260,
300,
and
400
gallon
tanks
-
Good
row
visibility
is
provided
by
parallel
side
mounts
-
Step
ladder
provides
easy,
safe
access
-
Heavy
7" x
7" x
3/8"
tube
supports
tank
saddle
-
Newly
designed
side
plates
eliminate
row
interference
-
Hi-density
tanks
are
standard
-
3
year
limited
warranty
on
tanks
-
Tanks
have
1-1/4"
and
3/4"
outlets
|
|
New
design
on the
front
mount
distributes
the load
evenly
over the
entire
length
of the
weight
bracket.
A heavy
steel
brace
attaches
the
saddle
to the
tractor
frame. A
fitting
under the
weight
bracket
keeps
the hook
set in
place.
Eight
grade-5
bolts
secure
the
saddle
to the
hook
set. |
|
Tubes in
place
with the
bottom
bolt in
place so
that
tube can
be
pivoted
into
place
and the
rest of
the
bolts
can be
installed. |
 |
|
 |
The
saddle
is
secured
to the
7" x 7"
x 3/8"
tube
with two
U-bolts.
The
hollow
tube can
also be
used to
house the
plumbing. |
|
The
under
truss
distributes
the load
from the
side
plates.
Allowance
has been
made for
the
front
drive
shaft. |
|
A one
step
ladder
is
standard
on all
tank
mounts
assuring
safe and
easy
access
to the
tractor
cab. |
 |
|
top of
page |
|
|
|
|
| |
 |
- 900 - 1200 gallon capacity
- 200, 260, 300, and 400 gallon tanks
- Good row visibility is provided by parallel side mounts
- Step ladder provides easy, safe access
- Heavy 7" x 7" x 3/8" tube supports tank saddle
- Newly designed side plates eliminate row interference
- Hi-density tanks are standard
- 3 year limited warranty on tanks
- Tanks have 1-1/4" and 3/4" outlets
|
|
New design on the front mount distributes the load evenly over the entire length of the weight bracket. A heavy steel brace attaches the saddle to the tractor frame. A fitting under the weight bracket keeps the hook set in place. Eight grade-5 bolts secure the saddle to the hook set. |
| Tubes in place with the bottom bolt in place so that tube can be pivoted into place and the rest of the bolts can be installed. |
|
|
The saddle is secured to the 7" x 7" x 3/8" tube with two U-bolts. The hollow tube can also be used to house the plumbing. |
|
The under truss distributes the load from the side plates. Allowance has been made for the front drive shaft. |
| A one step ladder is standard on all tank mounts assuring safe and easy access to the tractor cab. |
|
|
|
|
|
 |
-
900
-
1200
gallon
capacity
-
200,
260,
300,
and
400
gallon
tanks
-
Good
row
visibility
is
provided
by
parallel
side
mounts
-
Step
ladder
provides
easy,
safe
access
-
Heavy
7" x
7" x
3/8"
tube
supports
tank
saddle
-
Newly
designed
side
plates
eliminate
row
interference
-
Hi-density
tanks
are
standard
-
3
year
limited
warranty
on
tanks
-
Tanks
have
1-1/4"
and
3/4"
outlets
|
 |
The
front
mount
bracket
distributes
weight.
A 7" X
7" tube
supports
the
weight
of the
mount
and
liquid,
heavy
braces
add
rigidity
to the
mount.
Loosening
two
U-bolts
allows
for easy
removal
of the
tank &
saddle.
|
 |
Side
plate
mounted
on the
tractor.
Note
that the
only
projections
are the
plate
tabs the
tube
bolts
to.
Stainless
steel
fender
guards
protect
the
fender
from
damage. |
 |
The
saddle
tube
attached
with the
bottom
bolt,
ready to
be
pivoted
into
place. |
 |
Saddle
tube
bolted
in
place.
3/4"
bolts
secure
saddle
tube but
allow
for easy
removal. |
 |
Saddle
is
secured
to the
tube by
two
U-bolts.
Tube can
be used
to house
plumbing. |
 |
One step
ladder
for easy
access
is
standard. |
 |
Heavy
under
truss
secures
the side
plates
and adds
additional
strength |
top of page |
|
|
| |
John Deere Wide-Trac Poly Tank Mounts
Available for 8000T Wide-Trac Series
|
 
|
- 8" screw on fill lid
- 450 gallon capacity
- Does not interfere with row visibility
- Maintains good weight balance
- Heavy density tanks feature large access cap at top
- Tank has bottom end fittings
- 25 gallon increment marks on tanks
- 12 gauge steel pan supports tank and heavy plate mounting brackets attached to hard mast and tractor frame
- Fast and simple installation
- Works with 16" track width (Can be used with 24" track, but not within the manufacture's recommended clearance.)
- Available also in stainless steel
|
John Deere Wide-Trac Poly Outside Tank Mounts
Available For 8000T Wide-Trac Series
|
 |
- 800 gallon capacity
- Works with 16" or 24" track width
- A total capacity of 1250 gallons can be achieved when used with the tanks above.
|
|
top of page |
|
4 WD |
John Deere 4-Wheel
Drive Hi-Clearance Tanks
|
 |
- 200, 300, and 400 gallon tanks
- Tanks can be located close to
the tractor or mounted further out
for easier access to engine
compartment.
- Good row visibility is provided
by parallel side mounts
- Saddle tubes and tanks can
easily be removed by using an
optional four jack set that fits
into the end of each tube.
- Heavy plate member bolt to the
tractor frame
- Four 1" U-bolts secure the tube
to the tractor plate.
- Saddles are mounted on heavy 7"
x 7" tube and secured to the tube
with 1" U-bolts.
|
top of
page |
|
|
|
|
|
|
