Series 9000C-O
Includes Models:  9006C-O, 9008C-O, 9016C-O, 9018C-O, and 9028C-O

• Planetary oil bath gear drive

• Max flow:  110-117 gpm

• Max pressure:  75 psi

• Max speed:  1000 rpm (540 and 1000 rpm PTO)

• Shaft:  1" solid, 1-3/8" hollow, 1-3/4" hollow

• Port sizes:  1-1/2" NPT inlet, 1-1/4" NPT outlet

• Impeller:  glass-filled nylon

• Shaft seals:  Viton standard

Series 9000C-O-SP   SELF-PRIMING
Includes Models:  9006C-O-SP, 9008C-O-SP, 9016C-O-SP, 9018C-O-SP, and 9028C-O-SP

• Planetary oil bath gear drive

• Max flow:  117 -119 gpm

• Max pressure:  68-75 psi

• Shafts:  1" solid, 1-3/8" hollow, 1-3/4" hollow

• Port sizes:  1-1/2" NPT, inlet 1-1/4" NPT outlet

• Impeller:  glass-filled nylon

• Shaft seals:  Viton standard

Series 9040C and 9040C-SP SELF PRIMING

Includes Models:  9046C AND 9048C

Includes Models:  9046C-SP, 9048C-SP, 9046C-BSP, AND 9048C-BSP

• Parallel helical gear drives

• Max flow:  180 gpm; 167 gpm (SP and BSP)

• Max pressure:  130 psi; 120 psi (SP and BSP)

• Shafts:  1-3/8" 540 PTO spline;  1-3/8" 1000 PTO spline

• Port sizes:  2" NPT inlet, 1-1/2" NPT outlet
                      SP:  2" NPT inlet, 2" NPT outlet
                      BSP:  2" BSP inlet, 2" BSP outlet

• Impeller:  glass-filled nylon

• Shaft seals: Viton

top of page

Series 9205C

• Direct drive

• Max flow:  180 gpm

• Max pressure:  190 psi

• Max speed:  4200 rpm

• Shaft:  7/8" solid

• Port sizes:  2" NPT inlet, 1-1/2" NPT outlet

• Shaft seal:  Viton

Series 9205C-SP  SELF-PRIMING
Includes Models:  9205C-SP and 9205C-BSP

• Direct drive

• Max flow:  163 gpm

• Max pressure:  120 psi

• Max speed:  4200 rpm

• Shaft:  7/8" solid

• Port sizes:  2" NPT inlet, 1-1/2" NPT outlet
                      2" BSP inlet, 1-1/2" BSP outlet

• Shaft seal:  Viton

Series 9250C
Includes Models:  9252C-C, 9253C-C, AND 9253C-CR
The same features as the Series 9200C with the following exceptions:

• Pedestal mount with DC clutch drive

• Max flow:  140 gpm

• Max pressure:  120 psi

• Max speed:  5000 rpm

• Shaft:  7/8" solid

• Port sizes:  9252C 1-1/4" NPT inlet, 1" NPT outlet
                      9253C 1-1/2" NPT inlet, 1-1/4" NPT outlet

• Impeller:  glass-filled nylon

Series 9000P
Includes Models:  9006P-O, 9008P-O, 9016P-O, AND 9018P-O

• Planetary oil bath gear drive

• Max flow:  86-93 gpm

• Max pressure:  80 psi

• Max speed:  1000 rpm (540 and 1000 rpm PTO)

• Shaft:  1-3/8" PTO

• Port sizes:  1-1/2" NPT inlet, 1-1/4" NPT outlet

• Impeller:  glass-filled polypropylene

• Shaft seals:  Viton standard

Series 9200P-S
Includes Models:  9203P-S and 9253P-C (Model 9253P-C includes a 12-volt clutch)

• Pedestal mount

• For belt and pulley drive

• Max flow:  92 gpm

• Max pressure:  80 psi

• Max speed:  4200 rpm (540 and 1000 rpm PTO)

• Shaft:  7/8" PTO

• Port sizes:  1-1/2" NPT inlet, 1-1/4" NPT outlet

• Impeller:  glass-filled polypropylene

• Shaft seals:  Viton standard

Series 9300P
Includes Models:  9303P-HM1C, 9303P-HM2C, 9303P-HM3C, and 9303P-HM4C

• Hydraulic motor drive (for open center, closed center, and load sensing systems)

• Max flow:  86-109 gpm

• Max pressure:  80-125 psi

• Port sizes:  1-1/2" NPT inlet, 1-1/4" NPT outlet

• Impeller:  glass-filled polypropylene

• Motor:  Internal gear gerator

• hydraulic ports:  1/2" NPT

• Motor capacities:  5-20 gpm

• Centrifugal shaft seals:  Viton standard

• Hydraulic motor seal:  double-tip Teflon

Series 9500P
Includes Models:  9500P-S and 9510P

• Direct mount

• Max flow:  83 gpm

• Max pressure:  55 psi

• Max speed:  3600 rpm

• Shafts:  9500P-S  7/8" solid, 316SS
                9510P  1" hollow

• Port sizes:  1-1/2" NPT inlet, 1-1/4" NPT outlet

• Impeller:  glass-filled polypropylene

• Flanges for:  9510P 8 hp gas engine
                         9520P 182TC/184TC frame electric motor

• Shaft seals:  Viton standard

Series 9400 Belt Drive

• Drive:  12 groove belt
• Spring loaded belt tensioner
• Stainless steel wear ring
• Stainless steel pump shaft standard

• Max flow:  84-140 gpm

• Max pressure:  80-104 psi
• Max speed:  600 and 1000 rpm PTO
• Five shaft for 540 and 1000 PTO:
                       1" solid
                       1-3/8" hollow, 6-spline
                       1-3/8" quick coupler, 6-spline
                       1-3/8" hollow, 21-spline
                       1-3/4" hollow, 20-spline
• Port sizes:   1-1/4" NPT inlet, 1" NPT outlet
                       1-1/2" NPT inlet, 1-1/4" NPT outlet
• Impeller:  glass-filled nylon or polypropylene
• Shaft seals:  Viton standard

• Direct drive

• Max flow:  100 gpm

• Max pressure:  100 psi

• Max speed:  1000 rpm

• Shaft:  15/16" stainless steel with 1/4" keyway

• Port sizes:  1-1/2" NPT inlet, 1-1/2" NPT outlet

• Impeller:  glass-filled Valox

• Shaft seal:  lip-type Viton

• Couplers:  forged steel shaft couplers in 1-3/8" and 1-3/4" sizes

• Torque arm and chain

Series 9940-9750NRL

• Noryl. pedestal mount, direct drive
• Max flow:  132 gpm
• Max pressure:  35 psi
• Max speed:  3600 rpm
• Shaft:  Carpenter 20, 5/8" solid
• Port sizes:  1-1/2" NPT inlet, 1-1/2" NPT outlet
• Housing:  Noryl (chemical resistant coated, cast iron bearing housing)
• Impeller:  Noryl
• Shaft seals:  non-corrosive, thermo-plastic, mechanical, stationary